F405 Flight Controller Stack 30×30 FC FPV Stack with 4 in one 3~6S ESC 50A BLHeli_S Brushless ESC for Freestyle Drone Quadcopter & Fixed-Wing
Click for More Images
Built with the firm STM32F405 MCU, MPU6000 and large motor pads which makes you can solder up your motors easily and brings a smooth flight experience.
Equipped with some pads to support soldering up the LED strip and GPS. After you solder up them, you can fly your model at night and check where is it, which is very convenience.
The continuous current of 50A 4 in 1 ESC is 50A*4, the the burst current is 60A for 5 seconds. Support Dshot300, 600 PWM control signal.
The mounting size is 30.5 x 30.5mm and the hole diameter is 4mm, which is suitable for most models in the market. You can according to it choose whether it is fit your models or not.
Built-in type-c socket, you can connect the flight controller stack with your computer to change the data that you want. The firmware is Betaflight Configurator.
More Information …
Click Below For Full Details