Matek F405-WING Flight Controller F4 FC Built-in OSD BEC Current Sensor on Board for RC FPV Racing Drone

FC
MCU: 168MHz STM32F405
IMU: MPU6000 accelerometer/gyro (SPI)
Baro: BMP280 (I2C)
OSD: INAV OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP andamp; 6x UARTs
2x Motors, 7x Servos outputs
2x I2C
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2 pad
Battery Voltage Sensor: 1:10 (Scale 1100)
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
FC Firmware

INAV Flight
Target: MATEKF405SE

PDB
Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
2x ESC power pads
Current Senor: 104A, 3.3V ADC, Scale 317

BEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Continuous current: 2 Amps, Max.3A

BEC 9V /12V output
Designed for Video Transmitter, Camera, Gimbal ect.
Continuous current: 2 Amps, Max.3A
12V option with Jumper pad

BEC Vx output
Designed for Servos
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.6A
Output Ripple: 50mV (VIn=24V, VOut=5V5A load)

BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 500mA

Physical
Mounting: 30.5 x 30.5mm, ?4mm with Grommets ?3mm
Dimensions: 56 x 36 x 13 mm
Weight: 25g

Package Including
1 * Matek F4 Flight Controller Built-in OSD

Matek Flight Controller F405-WING: Upgraded Flight Controller,it is designed specially for fixed wing.,with 4x BEC current sensor on board.
Current Senor: 104A, 3.3V ADC, Scale 317,Mounting: 30.5 x 30.5mm, ?4mm with Grommets ?3mm.
4x BEC on board:2x Motors, 7x Servos outputs , 2x I2C , 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
MCU: 168MHz STM32F405 , IMU: MPU6000 accelerometer/gyro (SPI) , Baro: BMP280 (I2C) , OSD: INAV OSD w/ AT7456E chip , Blackbox: MicroSD card slot (SD/SDHC).
Much more details, pls click here:http://www.mateksys.com/?portfolio=f405-wingtab-id-2