Matek PDB for Fixed Wings, 4x BEC Power Distribution Board (9-30V DC Input, 3.3V 500mA Cont, 104A Current Sensor)
PDB
Input voltage range: 9~30V (3~6S LiPo) w/TVS protection2x ESC power padsCurrent Senor: 104A, 3.3V ADC, Scale 3174x BEC on board3x LED indicators for 5V, 10V andamp; VxSoldering Holes andamp; Pads
+ andamp; – : Bettery andamp; ESC power padsCurr: Current sensor outputVbat: Bettery voltageG: Ground3V3: LDO 3.3V5V: BEC 5V10V: BEC 10VVx: BEC 5V/6V/7.2V ADJFFC connection
Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSDMT1: Motor1 of INAV Flying Wing andamp; AirplaneMT2: Motor2 of INAV Flying Wing andamp; AirplaneSV3~SV6: Servo 3~6 of INAV Flying Wing andamp; AirplaneVTX: Video Transmitter signalTX5 andamp; RX5: UART5 of F405-STD/F722-STD/F405-OSDBEC 5V output
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS moduleDC/DC synchronous buck regulatorVoltage: 5.0 +/- 0.1VDCContinuous current: 2Amps, Max.3AOutput Ripple: 20mV (VIn=24V, VOut=5V2A load)Short-circuit tolerant (2 seconds)BEC 10V output
Designed for Video Transmitter, GimbleDC/DC synchronous buck regulatorVoltage: 10.0 +/- 0.2VDC (Input voltage andgt;11V)Continuous current: 2Amps, Max.3AOutput Ripple: 20mV (VIn=24V, VOut=10V2A load)Short-circuit tolerant (2 seconds)BEC Vxoutput
Designed forServosDC/DC synchronous buck regulatorVoltage adjustable, 5V Default, 6V or 7.2V via jumperContinuous current: 5Amps, Max.5.5AOutput Ripple: 50mV (VIn=24V, VOut=5V5A load)Short-circuit tolerant (2 seconds)BEC 3.3Voutput
Designed for Baro / Compass module andSpektrum RXLinear RegulatorContinuous current: 500mAPhysical
Package Including
1 * Matek FCHUB-W PDB Board
1 * Pin Header
6 * Screws
- Mateksys PDB FCHUB-W?Mounting: 30.5 x 30.5mm, ?3mm,Dimensions: 52 x 36 x 6 mm,Special PDB for Fixed Wings, 4x BEC current sensor on board.
- 4x BEC an Bord, 1.BEC: 5V 2A cont., Max.3A — 2.BEC: 10V 2A cont., Max.3A — 3.BEC: Vx 5A Fortsetzung, Max.5.5A für Servos — 4.BEC: Vx = 5 V Standard, 6 V oder 7,2 V ADJ 5A cont.
- FFC connection,compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSD,VTX: Video Transmitter signal,TX5 RX5: UART5 of F405-STD/F722-STD/F405-OSD.
- BEC 5V output,designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module;BEC 10V output ,designed for Video Transmitter, Gimble;BEC Vx output,designed for Servos;BEC 3.3V output,designed for Baro / Compass module and Spektrum RX.
- Much more details, pls click here:http://www.mateksys.com/?portfolio=fchub-wtab-id-1
